Izisombululo zeTurnkey zokwenziwa nokuhlelwa kwezinto zesikhwama ngokomthamo

Inkcazo

1. Ukusetyenziswa ngobuninzi kwetekhnoloji yokulandelelana kweekhasethi zokubumba (isixhobo) kwizinto zesikhwama.

2. Umatshini wokwakha isikhwama samandla oqhelekileyo othe tye uvelisa imveliso 17 PPM ngeyunithi nganye, ngelixa umgca opheleleyo wokwakheka nokuhlelwa ngokwesixa ufikelela 71 PPM.

3. Uqwalaselo oluguquguqukayo lwexesha lomjikelo wezixhobo kunye nenani leemodyuli ngokuhambelana neemfuno zabathengi.

4. Ukuhambelana okuphezulu neentlobo ezahlukeneyo zebhetri, ukuguquguquka kunye nexesha elincinci lokutshintsha.

Iingenelo zesisombululo

1. Ukusebenza kakuhle kakhulu

• Iinketho zokuhlela eziguquguqukayo:

  • Inkqubo yekhasethi eguquguqukayo ihlawula ngokupheleleyo ukunyamezelana kobukhulu bezinto zesikhwama (± 0.2 mm), iqinisekisa ukusebenza kokuhlela ukuya kuthi ga 240 PPM.

  • Ixhasa uluhlu olubanzi lokucwangcisa imisinga ukusuka 0.5C ukuya kwi-3C, ukwanelisa iimfuno zeenkqubo zokutsala kunye nokugcina.

• Ulawulo oluchanekileyo lokwakheka:

  • Inkqubo yokwakheka kobumnini enempendulo yoxinzelelo kunye nokulungiswa koxinzelelo lwekhasethi ngexesha langempela (50–300 kg), inika ukumelana okuzinzileyo koqhagamshelwano lwe-interface.

  • Ukuchaneka kokulinganisa iVoltage ±1 mV, ukuhlela ngokuchanekileyo ngokomthamo ±0,3%, Yintoni ese Ingcono ngama-50%, kunomyinge weshishini.

2. Inkqubo ekhethekileyo yolawulo lokhuseleko

• Ulawulo lokhuseleko lwe-3D:

  • Ukubeka esweni ukwanda kobukhulu obudibeneyo (± 0.05 mm) + ukuskena ubushushu bomphezulu (± 0.5 °C) + ukubeka esweni uxinzelelo lwangaphakathi (± 50 Pa).

  • Ixesha lokuzahlula ngokuzenzekelayo kwezinto ezingaqhelekanga 100 ms, idlula iimfuno zesatifikethi UL1973.

• Iphakheji yetekhnoloji yokulwa nokudumba:

  • Ukwakheka kwe-vacuum enamanqanaba amaninzi (inokuhlengahlengiswa ukusuka –80 kPa kuxinzelelo lomoya) ithintela ngokufanelekileyo ukubola kwe-electrolyte, inciphisa amanqanaba okudumba ukuya .

3. Izisombululo ezikrelekrele

• Inkqubo yezothutho eguquguqukayo:

  • Indlela yokondla ene-vacuum adsorption kunye ne-visual positioning, ehlengahlengisiweyo kutshintsho lobukhulu bezinto zesikhwama (0.3–1.2 mm).

  • Inkqubo yolawulo lomgangatho esebenza nge-AI ibona ngokuzenzekelayo iziphene eziqhelekileyo kwizinto ezikwipokotho, ezifana nokugoba kwephini kunye nemikrwelo kwifilimu yealuminiyam.

• Uyilo lokucwangcisa oluyimodyuli:

  • Ikhabhinethi enye ixhasa uqwalaselo oluguquguqukayo Iitshaneli ezi-8–32, iyahambelana nezinto zesikhwama 30–300Ah.

  • Lixesha lokutshintsha imodeli imizuzu eli-15, ifanelekile kwimveliso encinci kunye neyovavanyo.

4. Uyilo lokonga umbane

• Ukubuyiselwa kwamandla e-hybrid:

  • Ukusebenza kakuhle kokubuyisela amandla ngexesha lokukhupha ≥ 90% kwizinto zesikhwama ezinobunzima obuphezulu.

  • Ukonga amandla kuvuliwe 40% xa kuthelekiswa nezisombululo zemveli.

• I-Intelligent Standby:

  • Itshintshela ngokuzenzekelayo kwimodi yamandla aphantsi ngexesha lokungasebenzi, ukusetyenziswa kwimodi yokulinda 5 kWh.

5. Ulawulo lwedatha olupheleleyo lomjikelo wobomi

• Ukulandeleka ngokupheleleyo:

  • Ii-tracking form pressure curves, imbali yobukhulu, kunye neempawu ze-OCV zento nganye.

  • Ukwenziwa kwemodeli yokuqikelela ubomi benkonzo esekelwe kwi-coefficient yokwandiswa kwezinto zesikhwama.

• Inkqubo yamawele edijithali:

  • Ukulinganisa ngexesha langempela ukusasazwa koxinzelelo lwe-3D ngexesha lenkqubo yokwenza ukuze kuphuculwe iiparameter zenkqubo.