Mayankho a Turnkey opangira ndi kusanja zinthu za thumba malinga ndi mphamvu

Kufotokozera

1. Kugwiritsa ntchito ukadaulo wosiyanasiyana wa makaseti (chopangira) pazinthu za thumba.

2. Makina opangidwa ndi thumba lamphamvu lopingasa lopingasa amapereka zokolola 17 PPM pa unit, pomwe mzere wonse wa mapangidwe ndi kusanja malinga ndi mphamvu umafika 71 PPM.

3. Kusintha kwa nthawi yozungulira zida ndi kuchuluka kwa ma module molingana ndi zosowa za makasitomala.

4. Kugwirizana kwambiri ndi mitundu yosiyanasiyana ya batri, kusinthasintha kwa ntchito komanso nthawi yochepa yosinthira.

Ubwino wa yankho

1. Kuchita bwino kwambiri

• Zosankha zosanja zosinthika:

  • Dongosolo la makaseti osinthika limakwaniritsa bwino kulekerera makulidwe a zinthu za m'thumba (± 0.2 mm), ndikuwonetsetsa kuti magwiridwe antchito okonza mpaka 240 PPM.

  • Imathandizira mitundu yosiyanasiyana ya mafunde oyambira 0.5C mpaka 3C, kukwaniritsa zofunikira za makina ogwirira ntchito ndi osungira.

• Kuwongolera bwino kapangidwe kake:

  • Njira yopangira umwini yokhala ndi mayankho a kupanikizika ndi kusintha kwa kupanikizika kwa makaseti nthawi yeniyeni (50–300 kg), zomwe zimapangitsa kuti mawonekedwe azitha kukana kulumikizana bwino.

  • Kulondola kwa muyeso wa voliyumu ±1 mV, kusanja molondola malinga ndi mphamvu ± 0,3%, chikuchitika ndi chiyani 50% bwino, kuposa avareji ya makampani.

2. Njira yapadera yoyang'anira chitetezo

• Kuwongolera chitetezo cha 3D:

  • Kuwunika kophatikizana kwa makulidwe (± 0.05 mm) + kusanthula kutentha kwa pamwamba (± 0.5 °C) + kuyang'anira kuthamanga kwa mkati (± 50 Pa).

  • Nthawi yodzipatula yokha ya zinthu zachilendo 100 ms, kupitirira zofunikira za satifiketi UL1973.

• Phukusi laukadaulo woletsa kutupa:

  • Kupanga vacuum yokhala ndi magawo ambiri (yosinthika kuchokera ku –80 kPa ku kuthamanga kwa mpweya) kumaletsa bwino kuwonongeka kwa electrolyte, kuchepetsa kuchuluka kwa kutupa kwa .

3. Mayankho anzeru

• Dongosolo losinthasintha la zinthu:

  • Njira yodyetsera yokhala ndi vacuum adsorption ndi malo owoneka bwino, yosinthidwa kuti igwirizane ndi kusintha kwa makulidwe a zinthu za thumba (0.3–1.2 mm).

  • Dongosolo lowongolera khalidwe loyendetsedwa ndi AI limadzionera lokha zolakwika zomwe zimapezeka m'matumba, monga ma pin folds ndi mikwingwirima mu filimu ya aluminiyamu.

• Kapangidwe ka kusanja modular:

  • Kabati imodzi imathandizira kusintha kosinthika Ma channel 8–32, yogwirizana ndi zinthu za thumba 30–300Ah.

  • Nthawi yosintha chitsanzo Mphindi 15, yoyenera kupanga zinthu zazing'ono komanso zoyambirira.

4. Kapangidwe kosunga mphamvu

• Kubwezeretsa mphamvu zosakanizidwa:

  • Kugwiritsa ntchito bwino mphamvu panthawi yotulutsa mphamvu ≥ 90% zinthu za thumba zomwe zili ndi mphamvu zambiri.

  • Kusunga mphamvu pa 40% poyerekeza ndi njira zachikhalidwe.

• Kuyimirira Mwanzeru:

  • Imasintha yokha kukhala mphamvu yochepa panthawi yopanda ntchito, kugwiritsa ntchito munthawi yoyimirira 5 kWh.

5. Kusamalira deta yonse nthawi yonse ya moyo

• Kutsata kwathunthu:

  • Ma curve otsatira kupanikizika, mbiri ya makulidwe, ndi makhalidwe a OCV pa chinthu chilichonse.

  • Kupanga chitsanzo cholosera za moyo wautumiki kutengera kuchuluka kwa zinthu zomwe zili m'thumba.

• Dongosolo la Mapasa a Digito:

  • Kuyerekezera kwa nthawi yeniyeni kwa kugawa kwa kupsinjika kwa 3D panthawi yopanga kuti kukwaniritse magawo a ndondomeko.