Moralo oa Tlhahiso ea Lisele tsa Prismatic
Moralo oa Tlhahiso ea Lisele tsa Prismatic - Moralo oa Sebopeho
Moralo oa Tlhahiso ea Lisele tsa Prismatic
| 01 | Ho kopanya |
| 02 | Ho koahela |
| 03 | Ho hlophisa khalendara |
| 04 | Ho seha |
| 05 | Ho seha ka lesela |
| 06 | Ho kobeha/ho bokella |
| 07 | Sebōpi sa Kotopo |
| 08 | Ho tobetsa ho chesang |
| 09 | Teko ea X-ray |
| 10 | Ho kopanya |
| 11 | Ho tjheseletsa ka ultrasonic |
| 12 | Ho tjheseletsa sehokelo |
| 13 | Ho phuthela ka mylar |
| 14 | Ho kenya lekotikoti le ho tjheseletsa pele |
| 15 | Ho tjheseletsa Cap |
| 16 | Tlhahlobo ea Pele ea ho Dutla ha Mollo |
| 17 | Ho Baka ka Vacuum |
| 18 | EL ea pele. Ente |
| 19 | Boemo ba Mocheso o Phahameng |
| 20 | Sebopeho |
| 21 | EL ea bobeli. Ente |
| 22 | Ho Sebeletsa Lipekere ka ho Tiisa |
| 23 | Tlhahlobo ea ho Qetela ea ho Dutla ha Mollo |
| 24 | RT Standby |
| 25 | Ho fumana lintlha |
| 26 | Teko ea CVT |
| 27 | Ho phuthela |
Tlhaloso ea mohala oa tlhahiso
Tharollo e akaretsang bakeng sa mohala oa tlhahiso ea bongata ba betri ea lithium e loketse tlhahiso ea libeteri tsa lithium-ion hammoho le ho kopanya liphutheloana tsa libeteri.
Tlhahiso ea betri e arotsoe ka likarolo tse tharo:
Karolo ea elektrode e entsoe haholo-holo ka lisebelisoa tse kang ho kopanya, ho penta, ho phutholla, ho seha le ho seha ka die, tse phethang haholo-holo tlhahiso ea maqephe a elektrode;
Karolo ea kopano e na le ho bokella/ho phuthela, ho tjheseletsa, ho kenya khetla, ho baka, ho kenya EL. le lisebelisoa tse ling, tse ikarabellang haholo bakeng sa tlhahiso ea betri;
Mokhahlelo oa ho thehoa o na le ho thehoa, ho hlophisoa, OCV, DCIR, ho hlopha le thepa ea polokelo, e ikarabellang haholo bakeng sa ts'ebetso ea ho kenya tšebetsong betri.
Nakong ea kopano, lits'ebetso tse peli tse fapaneng, ho kobeha le ho laminating, li ka khethoa ho latela litlhoko.
Paramethara ea Lisebelisoa
| Bokhoni ba lisebelisoa | ≥15PPM/selae | Sekhahla sa bokhabane ba sehlahisoa | ≥99% |
| Sekhahla sa tšebeliso ea lisebelisoa | ≥98% | ||
| Mefuta ea tšebelisano-'moho | Bophara ba sele：100-220mm Bophahamo ba sele：90-225mm Botenya ba sele：20-80mm | ||
Lintlha-khōlō tsa mohala oa tlhahiso
1) Sistimi ea tsamaiso ea MES, ho etsa hore ts'ebetso ea tlhahiso e be ea dijithale, ho ntlafatsa bokhoni le boleng;
2) Botsitso bo matla, moralo o ntlafalitsoeng oa meaho, botsitso bo ntlafetseng ba ts'ebetso le sekhahla se fokotsehileng sa ho hloleha;
3) Ho tenyetseha ho matla, ho lumellana le mefuta e mengata ea libeteri, ho fihlella phetoho e potlakileng;
4) Moralo o ikhethileng o ipapisitseng le litlhoko tsa bareki le ts'ebetso ea mohala oa tlhahiso.