Ingubo Enomumo Okhethekile
Umshini Wokumboza Owenziwe Nge-Extrusion Obunjwe Ngendlela Ekhethekile
Isithombe somphumela wokumboza
Ubuchwepheshe obusha bokumboza obunokunemba okuphezulu, ukuthembeka kanye nokuqina, obufinyelela ukumboza okuqhubekayo, ukumboza okungapheli, ukumboza okumise okwe-L, ukumboza okunamathebhu amaningi, njll.
I-gasket yezinto ezikhethekile ezenziwe ngokwezifiso.
Imodi yokulawula enamakamelo amabili kanye namavalvu amabili.
I-servomotor engenisiwe.
Ukonga izinto zokusetshenziswa ezingama-20% - ukugqoka okumise okwe-L.
Ukonga izindleko zokukhiqiza - Ukugqoka ngamathebhu amaningi ngaphandle kokuhlanza nokuthepha nge-laser.
Umkhiqizi Wezixazululo Eziphelele Zemishini Yokukhiqiza Ehlakaniphile Yamabhethri Amasha E-Lithium Amandla
Umshini Wokumboza Owenziwe Nge-Extrusion Obunjwe Ngendlela Ekhethekile
| Ipharamitha Yobuchwepheshe | Inzuzo |
| Ububanzi bomphezulu wokugoqa | 450/550/750/850/1000/ |
| Ikhanda elifile | Okungenziwa ngezifiso |
| Isivinini sokumboza | Isivinini sokumboza: OKUPHEZULU: 50m/min; (igebe elingu-10mm) |
| Ukugijima kwe-roller | ≤1.2um (imitha yelaser kaKeen) |
| Ukungalingani kohlangothi lwangaphambili nolwangemuva | ≤±0.5mm |
| Ukunemba kokumboza | Ubuningi bobuso obuhlangothini olulodwa: ≤±1.5%; Ubuningi bobuso obuhlangothini oluphindwe kabili: ≤±1.2 |
| Ukuncipha kwekhanda nomsila | -10~0um |
| Ububanzi obungaguquki | OKUPHEZULU: 800mm |
| Ububanzi bomqulu ogoqekayo | OKUPHEZULU: 1200mm (qaphela ukugoqa itheyiphu okuzenzakalelayo ngaphandle kokuma nokunciphisa isivinini) |
| Ukucushwa kwe-oven | 2/3/4/5m/isigaba, ihhavini eliyinhloko eligcwele |
| Indlela yokushisa | Ukushisa ngogesi/ukushisa ngomusi/ukushisa uwoyela oshisayo (i-infrared) |
| Ipharamitha Yobuchwepheshe | Okujwayelekile |
| D (isifunda somphumela womphetho) | ≤2mm(-5～0μm) |
| A (umphetho olandelanayo) | ≤1mm (kuye ngokuthi iziphi izakhiwo ze-slurry) |
| F (iphutha lobubanzi) | ≤±0.5mm |
| E (iphutha lobude bepende) | ≤±0.5mm |
| H (iphutha elimhlophe) | ≤±0.5mm |
| I (iphutha lokuqondanisa ikhanda nomsila) | ≤±0.5mm |
| B (ukuncipha kwekhanda) 2 ~ 5mm | -5～0μm |
| C (Ukunciphisa umsila) 2 ~ 5mm | -5～0μm |
| J (ubuningi bobuso obunohlangothi olulodwa) (susa izindawo B, C, D) | ≤±1.5% |
| Iphutha lokuminyana kobuso obunezinhlangothi ezimbili (susa izindawo B, C, D) | ≤±1.2% |
