Ingubo enemibala ekhethekileyo
Umatshini wokuGqibezela i-Extrusion onemilo ekhethekileyo
Umfanekiso wesiphumo sokugquma
Itekhnoloji entsha yokugquma echanekileyo kakhulu, ukuthembeka kunye nozinzo, ifezekisa ukugquma okuqhubekayo, ukugquma okungenaziphazamiso, ukugquma okumile okwe-L, ukugquma okunamathebhu amaninzi, njl.
I-gasket yezinto ezikhethekileyo ezinokwenziwa ngokwezifiso.
Imo yokulawula igumbi eliphindwe kabini kunye nevalvu ezimbini.
I-servomotor engeniswe ngaphakathi.
Ukonga i-20% yezinto ezikrwada - ugqubuthelo olumile njengo-L.
Ukonga iindleko zokuvelisa - Ukufaka ii-multi-tab coating ngaphandle kokucoca nokutheyipha nge-laser.
Umvelisi wezisombululo ezipheleleyo zezixhobo zokuvelisa ezikrelekrele zeebhetri ezintsha zeLithium zamandla
Umatshini wokuGqibezela i-Extrusion onemilo ekhethekileyo
| Ipharamitha yoBugcisa | Inzuzo |
| Ububanzi bomphezulu weRoll | 450/550/750/850/1000/ |
| Intloko yefa | Ingenziwa ngokwezifiso |
| Isantya sokwaleka | Isantya sokugquma: IMAX: 50m/min; (umsantsa we-10mm) |
| Ukubaleka kweroller | ≤1.2um (imitha yelaser kaKeen) |
| Ukungalingani kwecala langaphambili nelangasemva | ≤±0.5mm |
| Ukuchaneka kokwaleka | Uxinano lomphezulu olunecala elinye: ≤±1.5%; Uxinano lomphezulu olunecala elinye: ≤±1.2 |
| Ukuncitshiswa kwentloko nomsila | -10~0um |
| Ububanzi obungajikiyo | Ubuninzi: 800mm |
| Ububanzi bomqulu ojikelezayo | MAX: 1200mm (qaphela i-automatic tape splicing ngaphandle kokuma kunye nokunciphisa isantya) |
| Uqwalaselo lwe-oven | 2/3/4/5m/icandelo, i-oveni ephambili yokuqhuba epheleleyo |
| Indlela yokufudumeza | Ukufudumeza ngombane/ukufudumeza ngomphunga/ukufudumeza ngeoyile eshushu (i-infrared) |
| Ipharamitha yoBugcisa | Umgangatho |
| D (ummandla wesiphumo somphetho) | ≤2mm(-5～0μm) |
| A (umphetho olandelanayo) | ≤1mm (kuxhomekeke kwiimpawu ze-slurry) |
| F (impazamo yobubanzi) | ≤±0.5mm |
| E (impazamo yobude bepeyinti) | ≤±0.5mm |
| H (impazamo emhlophe) | ≤±0.5mm |
| I (impazamo yokulungelelanisa intloko nomsila) | ≤±0.5mm |
| B (ukuncitshiswa kwentloko) 2~5mm | -5～0μm |
| C (Ukunciphisa umsila) 2~5mm | -5～0μm |
| J (uxinano lomphezulu olucala linye) (susa iindawo B, C, D) | ≤±1.5% |
| Impazamo yoxinano lomphezulu olumacala mabini (susa iindawo B, C, D) | ≤±1.2% |
