Seaparo se bōpehileng joaloka se khethehileng
Mochini o Ikhethang oa ho Koahela Extrusion
Setšoantšo sa phello ea ho koahela
Theknoloji e ncha ea ho roala e nang le ho nepahala ho hoholo, ts'epahalo le botsitso, e fihlelang ho roala ho tsoelang pele, ho roala ho sa khaotseng, ho roala ho bōpehileng joaloka L, ho roala ka li-tab tse ngata, jj.
Gasket ea thepa e khethehileng e ka fetoloang.
Mokhoa oa taolo ea likamore tse peli le li-valve tse peli.
Servomotor e kentsweng kantle ho naha.
Ho boloka 20% ea thepa e tala - ho roala ka sebopeho sa L.
Ho boloka litšenyehelo tsa tlhahiso - Ho koahela ka li-tab tse ngata ntle le ho hloekisa le ho theipe ka laser.
Moetsi oa Litharollo tse Akaretsang bakeng sa Lisebelisoa tse Bohlale tsa Tlhahiso ea Libetri tse Ncha tsa Lithium tsa Matla
Mochini o Ikhethang oa ho Koahela Extrusion
| Paramethara ea Tekheniki | Molemo |
| Bophara ba bokaholimo ba moqolo | 450/550/750/850/1000/ |
| Hlooho ea shoa | E ka fetoloa |
| Lebelo la ho roala | Lebelo la ho roala: MAX:50m/min; (sekheo sa 10mm) |
| Ho matha ha roller | ≤1.2um (mithara ea laser ea Keen) |
| Ho se lumellane hantle ha lehlakore le ka pele le le ka morao | ≤±0.5mm |
| Ho nepahala ha ho roala | Bongata ba bokaholimo ba lehlakore le le leng: ≤±1.5%; Bongata ba bokaholimo ba mahlakore a mabeli: ≤±1.2 |
| Ho fokotsa hlooho le mohatla | -10~0um |
| Bophara bo sa thekeseleng | MAX: 800mm |
| Bophara ba moqolo o kobehileng | MAX: 1200mm (hlokomela ho kopanya theipi ka boiketsetso ntle le ho emisa le ho fokotsa lebelo) |
| Tlhophiso ea Ontong | 2/3/4/5m/karolo, onto e kholo e felletseng |
| Mokhoa oa ho futhumatsa | Ho futhumatsa ka motlakase/ho futhumatsa ka mouoane/ho futhumatsa oli e futhumatsang (infrared) |
| Paramethara ea Tekheniki | E tloaelehileng |
| D (sebaka sa phello ea bohale) | ≤2mm(-5～0μm) |
| A (moeli o latelang) | ≤1mm (ho latela thepa ea lerōle) |
| F (phoso ea bophara) | ≤±0.5mm |
| E (phoso ea bolelele ba pente) | ≤±0.5mm |
| H (phoso ea ho soeufala) | ≤±0.5mm |
| I (phoso ea ho hokahanya hlooho le mohatla) | ≤±0.5mm |
| B (ho fokotsa hlooho) 2 ~ 5mm | -5～0μm |
| C (Ho fokotsa mohatla) 2 ~ 5mm | -5～0μm |
| J (botenya ba bokaholimo bo lehlakoreng le le leng) (tlosa libaka B, C, D) | ≤±1.5% |
| Phoso ea ho ba le bokaholimo bo mahlakore a mabeli (tlosa libaka B, C, D) | ≤±1.2% |
