Coater pụrụ iche
Igwe mkpuchi Extrusion pụrụ iche
Foto mmetụta mkpuchi
Teknụzụ mkpuchi ọhụrụ nwere ezigbo nkenke, ntụkwasị obi na nkwụsi ike, inweta mkpuchi na-aga n'ihu, mkpuchi na-aga n'ihu, mkpuchi na-aga n'ihu, mkpuchi dị ka L, mkpuchi ọtụtụ taabụ, wdg.
Gasket ihe pụrụ iche a pụrụ ịhazi.
Ụdị njikwa ụlọ okpukpu abụọ na nke valvụ abụọ.
Servomoto ebubatala.
Nchekwa 20% ihe eji emepụta ihe - mkpuchi dị ka L.
Ịchekwa ego nrụpụta - Mkpuchi ọtụtụ taabụ na-enweghị nhicha na teepu laser.
Onye Mmepụta Ngwọta zuru oke maka Ngwa Mmepụta Ọgụgụ Isi nke Batrị Lithium Ike Ọhụrụ
Igwe mkpuchi Extrusion pụrụ iche
| Teknụzụ Paramita | Uru |
| Obosara elu mpịakọta | 450/550/750/850/1000/ |
| Isi anwụ | Nhazi |
| Ọsọ mkpuchi | Ọsọ mkpuchi: MAX:50m/min; (Oghere 10mm) |
| Mkpọchi roller gbapụrụ | ≤1.2um (Njiko laser nke Keen) |
| Nhazi nke akụkụ ihu na azụ adịghị mma | ≤±0.5mm |
| Izizi mkpuchi | Njupụta elu otu akụkụ: ≤±1.5%; Njupụta elu akụkụ abụọ: ≤±1.2 |
| Isi na ọdụ na-ebelata | -10~0um |
| Dayameta na-emeghe | Oke: 800mm |
| Dayameta mpịakọta winding | MAX: 1200mm (mezue njikọta teepu akpaka na-enweghị nkwụsị na mbelata ọsọ) |
| Nhazi oven | 2/3/4/5m/ngalaba, oven draịva zuru oke |
| Usoro ikpo ọkụ | Okpomọkụ eletriki/okpomọkụ uzuoku/okpomọkụ mmanụ ọkụ (infrared) |
| Teknụzụ Paramita | Ọkọlọtọ |
| D (mpaghara mmetụta ọnụ) | ≤2mm(-5~0μm) |
| A (akụkụ n'azụ) | ≤1mm (dabere na ihe ndị dị ka slurry) |
| F (njehie obosara) | ≤±0.5mm |
| E (mmejọ ogologo agba) | ≤±0.5mm |
| H (njehie na-apụta ìhè) | ≤±0.5mm |
| I (mmejọ nhazi isi na ọdụ) | ≤±0.5mm |
| B (isi na-eme ka ọ dị gịrịgịrị) 2~5mm | -5～0μm |
| C (Ịkpụcha ọdụ) 2~5mm | -5～0μm |
| J (njupụta elu nke nwere otu akụkụ) (wepụ ebe B, C, D) | ≤±1.5% |
| Njehie njupụta elu nke nwere akụkụ abụọ (wepụ ebe B, C, D) | ≤±1.2% |
