Muchina weExtrusion unhani wakaumbwa zvakasiyana-siyana
| Chiratidzo cheUnyanzvi | Zvakajairika |
| D (nzvimbo yemhedzisiro yemucheto) | ≤2mm(-5～0μm) |
| A (mupendero wekutevera) | ≤1mm (zvichienderana nematopezvivakwa) |
| F (Mukatikukanganisa kwe idth) | ≤±0.5mm |
| Uye (pkukanganisa kureba (hakuna kureba) | ≤±0.5mm |
| H (kukanganisa kwakachena) | ≤±0.5mm |
| Ini (chikanganiso chekugadzirisa musoro nemuswe) | ≤±0.5mm |
| B (hkutetepa kwemusoro) 2 ~ 5mm | -5～0μm |
| C (Kutetepa kwemuswe) 2~5mm | -5～0μm |
| J (iyodivi rakatarisanapamusorokuwanda kwevanhu) (rnzvimbo dzemanzwiro B, C, D) | ≤±1.5% |
| Mativi maviripamusorokukanganisa kwehuwandu hwevanhu (bvisa nzvimbo B, C, D) | ≤±1.2% |
| Chiratidzo cheUnyanzvi | Zvakanakira |
| Ruva rwepamusoro pemupumburu | 450/550/750/850/1000/ |
| Musoro wakafa | Cinogona kugadziriswa |
| Kuputirakumhanya | Kumhanya kwekuputira: MAX:50m/min; (mukana we10mm) |
| Kumhanya kweroller | ≤1.2um (mita yelaser yaKeen) |
| Kusarongeka kwerutivi rwemberi nerwekumashure | ≤±0.5mm |
| Kunyatsonaka kwekunamira | Kuwanda kwenzvimbo ine divi rimwe chete: ≤±1.5%; Kuwanda kwenzvimbo ine divi rimwe chete: ≤±1.2 |
| Kutetepa kwemusoro nemuswe | -10~0um |
| Kusunungura dhayamita | MAX：800mm |
| Kutenderera kwemupumburu dhayamita | MAX: 1200mm (ziva otomatiki tepi splicing pasina kumira uye kuderedza kumhanya) |
| Kugadziriswa kweOvheni | 2/3/4/5m/chikamu, ovheni huru yekutyaira yakazara |
| Nzira yekudziyisa | Kudziisa kwemagetsi/kudziisa kwemhepo inodziya/kudziisa mafuta anodziya (infrared) |